Upgrading Ubiquiti PS2 to DD-WRT v24


Requirements:

    * Direct ethernet cable connection between PC and LiteStation
    * Network settings of PC: 192.168.1.254/255.255.255.0
    * TFTP client on PC
    * LiteStation firmware file (e.g. PS2.dd-wrt.bin for LiteStation5)

Flashing procedure:

    1. Please ensure that the latest firmware revision of Ubiquiti is already installed using the web upgrade utility (e.g.V 2.1.9)
       If not, please reflash it using the Ubiquiti PS2 Web interface. This is important to ensure that the latest RedBoot Bootloader
       is installed.
    2. power off the device and power it on again while holding the reset button for about ~10 seconds
    3. flash LS2.dd-wrt.bin using tftp to 192.168.1.20 in binary mode
	windows          : tftp -i 192.168.1.20 put PS2.dd-wrt.bin
	linux/unix/macosx: tftp 192.168.1.20
                           tftp> bin
                           tftp> put PS2.dd-wrt.bin
                           tftp> exit

    4. after successfully flashing the unit will be accessible with web on 192.168.1.1