Notes:

My builds in RC folders are for testing only - use
at your own risk. Micro and all 535x builds are not compatible
with MIMO routers.

About file names: (up to 9059)

-nogiga: means that there in no gigabit switch driver inside.

-535x: builds for routers with BCM5350, BCM5352 and BCM5354 cpu
      (some other routers also work with this builds, you can
       check if you have wl0_corerev=7 or 9, then it will work).
       note: there is no gigabit switch driver in RC5..-535x builds.
       RC6..-535x incudes gigabit switch driver if not indicated
       otherwise.

-SF: build for routers with serial flash chip, e.g. Belkin v2000.

Starting with 9068 there are new names:

- VINT:  vintage build (old driver), works on any router but 5354 based
- NEWD:  new driver with multi bssid support, works on any router but 4702 (4710) based
- SF:  build for routers with serial flash chip, e.g. Belkin v2000.
- WRH54G:  build only for Linksys WRH54G router

General rules: if you have old router with 4702 (4710) cpu and mini-pci
radio, you MUST use VINT build, if you have 5354 based router, you must
use NEWD build. All other routers can run both (VINT or NEWD) builds.
For gigabit routers always use NEWD.